|
 |
| Products / Welding Machines / Technical Data |
|
Technical Data
| Primary: |
| Power supply |
3 x 400 V |
| Frequency |
50/60 Hz |
| Continuous power |
5.5-9.7 kVA* |
| Continuous current |
8.0-14.0 A* |
| Max. current |
11.0-16.0 A* |
| Secondary: |
| No load voltage |
70 V |
| Pulse-Arc-/MIG-MAG-Betrieb: |
| Welding voltage |
15-27 V |
| Welding range |
20-250 A |
| Duty cycle 40% (10 min.) |
250 A |
| Duty cycle 60% (10 min.) |
250 A |
| Duty cycle 100% (40° C) |
200 A |
| TIG-operation: |
| Welding voltage |
10-20 V |
| Welding range |
10-250 A |
| Duty cycle 40% (10 min.) |
250 A |
| Duty cycle 60% (10 min.) |
230 A |
| Duty cycle 100% (40° C) |
210 A |
| Stick electrode operation: |
| Welding voltage |
20-30 V |
| Welding range |
10-250 A |
| Duty cycle 40% (10 min.) |
250 A |
| Duty cycle 60% (10 min.) |
220 A |
| Duty cycle 100% (40° C) |
200 A |
| Welding process |
Syn. Pulse-Arc/MIG-MAG/Interpuls/
Elektrode/TIG (DC)
|
| Setting energy |
continuous one button adjusting, on the unit/ on the TEDAC-torch, 4 programs on the TEDAC-torch |
| Arc lenght |
automatic adjusting |
| Arc trim |
variable resistor +/- 30 % |
| Operation mode |
2-stroke/4-stroke/4-stroke with down slope/stitch/spot welding |
| Timer spot/intermission |
continuous setting |
| Material selection |
steel/stainless steel/alu/ special/brazing |
| Wire diameter |
0,6/0,8/1,0 mm and special |
| Gas test |
button with HOLD-function and time switching |
| Power control |
IGBT-inverter |
| Torch cooling |
gas, option: water |
| Torch connection |
Euro-connector |
| Wire feeding system |
4-roller-gear DV-25 (0,5-25 m/min.) |
| Protection class |
IP 21 (option: IP 23) |
| Norm |
EN 60974-1 "S" / CE |
| Weight |
38 kg (without wire spool) |
| Dimensions (LxBxH) |
600 x 300 x 565 mm |
|
 |
 |
 |
 |
|
|
|
